Syllabus:
In this course you will learn about the basic principles of circuit design and
operation in a practical, real-world laboratory setting. You will work both with
discrete components such as resistors, capacitors, diodes, and transistors as well
as with integrated components such as operational amplifiers and timer 555. In
addition, you will become familiar with the operation of basic electronic test
equipment (digital multi-meters, oscilloscopes, function generators, curve
tracers, etc.). In addition, you will further understand the characteristics of
transistors through the semiconductor analyzer which is very important for device
development. There are 11 experiments this semester.

Handout: Download from Web Site
http://mx.nthu.edu.tw/~yunhwu/Electronics-Lab2.htm

The schedule of this course can be found below.

Preview:
You are strongly encouraged to read ahead of the lectures. After each lecture, you
should review the corresponding material in the textbook and then read the next
section or two before the following lecture. This familiarization process will
allow you to digest information from the lectures more easily.

Grading:
The final grade will depend on the items with relative weights shown below:
Labs.... (出席+時間獎勵)30 %
Quiz....................25 %
Final Exam..............20 %
Homework............……..20 %
Evaluation by TA .....…..5 %

Policy on Cheating:
Cheating is not tolerated. Getting the bad points in the exams may not fail in the
course, but the failing grade in this course will be necessarily got once cheating
is found.

Exp-1 Electrical Characteristics Measurement for NMOS Circuit
Exp-2 Electrical Characteristics Measurement for CMOS Circuit  
Exp-3 Electrical Characteristics Measurement for BJT  
Exp-4 Low Frequency Response for BJT Amplifier  
Exp-5 High Frequency Response for BJT Amplifier  
Exp-6 BJT Differential Amplifier  
Exp-7 Basic Operation of OP741  
Exp-8 Digital to Analog Converter  
Exp-9 Analog to Digital Converter  
Exp-10 Analog Comparator  
Exp-11 555 Timer IC Application  
Exp-12 Introduction to Semiconductor Analyzer