一、課程說明(Course Description)
The objective of this course is to present circuit analysis containing
both
active and passive components under both steady state and dynamic (time
varying) conditions in a manner that is clear, interesting, and easy to
understand. For Part I (DC Circuits), the fundamental laws and theorems,
circuits techniques will be covered. Part II (AC Circuits) deals with
phasors and sinusoidal steady-state analysis. The best approach to learn the
course well is to work as many problems as possible.     

The following is the outline of this course:
(1)Basic Concepts: The concept of circuit, voltage, current and dependent
and independent sources will be introduced.  
 
(2) Basic Laws: Circuit topology and the voltage and current laws will be
introduced. Meters for measuring voltage, current, and resistivity will be
presented.
 
(3) Methods of Analysis: Two techniques will be presented. Nodal analysis,
which is based on Kichhoff current law (KCL). Mesh analysis, which is
based on Kichhoff voltage law (KVL).

(4) Circuit Theorems: The concept of superposition will be
introduced. Source transformation, Thevenin and Norton’s theorems will be
covered.

(5) Operational Amplifiers: The operation amplifier will be introduced and
the basic function of this useful device will be discussed.

(6) Capacitors and Inductors: Two new linear circuit elements that store
energy including capacitor and inductor will be introduced.

(7) First-Order Circuits: RC and LC circuits’ reaction to switched sources
will be examined.Three special functions, the unit step, unit impulse, and
unit ramp function are also introduced.

(8) Second-Order Circuits: RLC series and parallel circuits that need a
second order differential equation will be discussed.
 
(9) Sinusoids and Phasors: A discussion of complex numbers is included prior
to introducing phasors. Applications of phasors and frequency domain
analysis for circuits including resistors, capacitors, and inductors will be
covered.

(10) Sinusoidal Steady-State Analysis: Circuit analysis introduced in the DC
circuit analysis will be applied for AC circuit analysis. Nodal and mesh
analysis are discussed.

(11) AC Power Analysis: The difference between instantaneous power and
average power will be discussed. The difference between resistive and
reactive power will be introduced.


二、指定用書(Text Books)
Alexander/Sadiku, "Fundamentals of Electric Circuits" International 6th
Edition. (Part I: DC Circuits. Chapter 1-8, Part II: AC Circuits. Chapter 9-
11)

三、參考書籍(References)
Nilsson/Riedel, "Electric Circuits," 10th Edition.
Dorf/Svoboda, "Introduction to Electric Circuits," 9th Edition.

四、教學方式(Teaching Method)
Powerpoint files from the course website.

五、成績考核(Evaluation)
Homework: 10%
Midterm I: 30%
Midterm II 30%
Final: 30%


七、可連結之網頁位址
http://greenelectronics.wixsite.com/yung-hsien-wu