一、課程說明(Course Desc<x>ription)
<br>
<br>This course introduces the basic theory of digital logic design and the implementation of logic 
<br>circuit. In the beginning, binary number systems, simple boolean algebra, and switching functions 
<br>are presented. 
<br>The optimization method for combinational logic, which is the most important portion of the digital 
<br>logic design, will be presented in detail in this section. Then, basic storage registers such as D-flip-
<br>flop, J-K-flip flop etc will be introduced in the section of the synchronous sequential logic, which 
<br>will form a foundation for useful control technique - finite-state machine. After that combination 
<br>logic and sequential circuits are combined to support number control in the digital system. The 
<br>design for the registers and counters are taught in different types. Memory is the very traditional 
<br>digital element in the IC circuit, and the basic operations of read, write, and error protection will be 
<br>demonstrated. In the same section, the programmable devices such as PAL, PLA, PLD, CPLD, and 
<br>FPGA will be introduced. 
<br>Finally, the basic desc<x>ription of digital logic, Register Transfer Level, will be introduced, which will 
<br>form the basic concept to develop the digital system through the hardware desc<x>ription language.
<br>
<br> 二、指定用書 (Text Books)
<br>
<br>M. Morris R. Mano and Michael D. Ciletti, Digital Design: With an Introduction to the Verilog HDL, VHDL, and 
<br>SystemVerilog (6th Edition), Pearson International Edition.
<br>
<br>
<br> 三、教學方式 (Teaching Method)
<br>
<br>Lecture
<br>
<br> 四、教學進度 (Syllabus)
<br>
<br>(1)Digital systems and information
<br>(2)Combinational logic circuits
<br>(3)Combinational logic design
<br>(4)Arithmetic functions
<br>(5)Sequential circuits
<br>(6)Registers and register transfers
<br>(7)Memory basics
<br> 
<br>
<br> 五、成績考核 (Evaluation)
<br>
<br>Homeworks and quiz 25%, Midterm Exams x2 50%, Final Exam 25%
<br>
<br> 六、可連結之網頁位址
<br>
<br>http://lms.nthu.edu.tw/