一、	課程說明 (Course Desc<x>ription) 
<br>材料實驗一是在驗證課堂所學的材料科學知識，選擇一些基本單元實際操作，主要有金相製作與
<br>觀察、機械性質試驗、、鋼鐵熱處理、黃銅冷加工及退火材料鑑定。實際操作驗證製程、微結構、
<br>性質的關聯。 
<br>Laboratories of Materials I is to verify the knowledge of Material Science 
<br>learned in relevant courses and find out the relationships between the 
<br>processes, properties, and microstructure of materials through practices. 
<br>The experiments contain instrument practices of analysis and identification 
<br>of materials, sample preparation and observation of microstructures, tests 
<br>on mechanical properties, cold working and annealing of brass, and heat 
<br>treatment of steel. 
<br>
<br>二、	指定用書 (Text Books) 
<br>
<br>"材料工程實驗與原理" 林樹均、葉均蔚、劉增豐、李勝隆，全華圖書。 
<br>
<br>三、	參考書籍 (References) 
<br>
<br>工程材料實驗 (I)--金屬材料實驗，主編:洪敏雄，中國材料科學學會，民國 88 年 11 月。 
<br>
<br>四、教學方式 (Teaching Method) 
<br>
<br>實驗前，先上課講解實驗原理；實驗時，先講解儀器操作及實驗過程，然後進行實驗；實驗後，
<br>繳
<br>交一份實驗報告。 
<br>
<br>五、教學進度 (Syllabus) 
<br>
<br>1. 簡介 1 週 
<br>1. Introduction (1 week) 
<br>
<br>2. 高低碳鋼顯微組織觀察 3 週 
<br>2. Preparation, observation, and recording of microstructures of steels (3 
<br>weeks) 
<br>
<br>3. 機械性質測試 (硬度、拉伸、衝擊試驗) 3 週 
<br>3. Tests on mechanical properties of materials, such as hardness, tensile, 
<br>and impact tests (3 weeks) 
<br>
<br>4. 期中考 1 週
<br>4. Midterm exam (1 week) 
<br>
<br>5. 鋼之熱處理 3週 
<br>5. Heat treatments of steels (3 weeks) 
<br>
<br>6. 三七黃銅冷加工及退火 3 週 
<br>6. Cold working and annealing of Cu-30Zn brass (3 weeks) 
<br>
<br>7. 期末考 1 週
<br>7. Final exam (1 week)
<br>
<br>六、成績考核(Evaluation) 
<br>
<br>1. 實驗報告：60% 
<br>2. 期中考：15%
<br>3. 期末考：15% 
<br>4. 實驗精神：10% 
<br>