一、課程說明(Course Desc<x>ription)
<br>
<br>This course introduces the basic theory of digital logic design and the implementation of logic circuit. In the 
<br>beginning, binary number systems, simple boolean algebra, and switching functions are presented. The 
<br>optimization method for combinational logic, which is the most important portion of the digital logic design, will 
<br>be presented in detail in this section. Then, basic storage registers such as D-latch, D-flip-flop etc will be 
<br>introduced in the section of the synchronous sequential logic, which  will form a foundation for useful control 
<br>technique - finite-state machine. After that combination logic and sequential circuits are combined to support 
<br>number control in the digital system. The design for the registers and counters are taught in different types. 
<br>Memory is the very traditional digital element in the IC circuit, and the basic operations of read, write, and error 
<br>protection will be demonstrated. In the same section, the programmable devices FPGA will be introduced. 
<br>Finally, the basic desc<x>ription of digital logic, Register Transfer Level, will be introduced.
<br>
<br> 二、指定用書 (Text Books)
<br>
<br>M. Morris R. Mano and Michael D. Ciletti, Digital Design: With an Introduction to the Verilog HDL, VHDL, and 
<br>SystemVerilog (6th Edition), Pearson International Edition.
<br>
<br> 三、教學方式 (Teaching Method)
<br>
<br>Lecture
<br>
<br> 四、教學進度 (Syllabus)
<br>
<br>(1)Digital systems and information
<br>(2)Combinational logic circuits
<br>(3)Combinational logic design
<br>(4)Arithmetic functions
<br>(5)Sequential circuits
<br>(6)Registers and register transfers
<br>(7)Memory basics
<br>
<br> 五、成績考核 (Evaluation)
<br>
<br>Quiz 25%, Midterm Exams x2 50%, Final Exam 25%
<br>
<br>
<br> 六、可連結之網頁位址
<br>
<br>https://eeclass.nthu.edu.tw/15438